Graber 1 inch Virtual Cord Z-Wave EvenPleat Shades

$531.60
your savings :
retail :
In stock
SKU
1-evenPleat-virtual-cord-graber-shades
Save an additional 10% + Site wide discount

Save an additional 10% + Site wide discount when you add to cart. Discount is auto applied to your shopping cart total.

1-evenPleat-virtual-cord-graber-shades
Z-wave enabled motorized 1-inch EvenPleat Virtual Cord Pleated Shades for Smart Homes. Can be controlled via Smartphones, Timers and Voice Assistants. Shop now!
Graber
Graber 1 inch Virtual Cord Z-Wave EvenPleat Shades
Graber 1 inch Virtual Cord Z-Wave EvenPleat Shades

Graber's 1" EvenPleat® Graber® Virtual Cord™ Z-Wave Shades

can be used with any of the following

Google Home*

Hey Google, set my shade to 25%

Amazon Alexa*

Alexa, set my shade to 75%

Z-wave Remote

Use a remote to Open or Close

Z-wave Hubs

Works with most Z-wave Hubs

SmartThings Hub*

Supported and Works on SmartThings

*Voice control using assistants such as Google Home, Google Assistant, Amazon Alexa or Amazon Echo control requires a Samsung SmartThings Hub, Hubitat Elevation Hub or a Graber Gateway/Smart hub. Voice control may work with other hubs however, it is dependent on the hub itself. These smart shades work with most z-wave hubs such as Samsung's SmartThings, Hubitat Elevation, Homeseer, Vera, Wink, Nexia, Homeassistant with a z-wave module and others.

Graber 1 inch Virtual Cord Z-Wave EvenPleat Shades Product Detail

Features

Works With Z-wave

To connect to your Z-wave smart hub no additional dongles or bridges are needed. It allows you to check the status of you window shades on the hub's app

Works With Voice

Control you shades with voice commands. These smart shades are voice compatible with Amazon Alexa and Echo and with Google's Home and Assitant. Voice control requires a compatible z-wave hub such as SmartThings

Product Specifications
OptionStandard
Min WidthMax WidthMin HeightMax Height
Virtual Cord 12V RF Motor 18" 120" 12" 96"

Inside Mount Depth Requirements
OptionHeadrail DimensionMin Depth MountFlush with Casing
Virtual Cord 12V RF Motor 11/16" x 1 9/16" 5/8" 1 7/8"

Approximate deductions for Graber pleated shades - Inside mount – 3/8 inch, Outside mount – no deduction. Since all Graber shades are custom/handmade there could be a tolerance of measurement (+/-) 1/8th inch.

Available Options

- Different Motor Packages available (Optional)
- Single Channel Remote Control available (Optional)
- For Power Considerations & Power Sizing considerations click here
- Different Controls and Installation Accessories available (Optional)
- Liners available (Optional)

Untitled Document © 2010 - 2022 ZebraBlinds.ca. All Rights Reserved.