All Articles, Uncategorized

How You Can Make DIY Room Darkening Window Treatments on The Cheap

To create your own Room Darkening Window Treatments, you don’t need to be a DIY expert They’re as hard to make as you might think. Room Darkening Window Treatments are the way to go if you’re renovating your bedroom, constructing a nursery, or just want to keep your room dark during the day.

Everyone enjoys having natural light in their homes, but what can you do if your windows let in too much? Check out the following section for information on diy room darkening window treatments.

What are the Advantages of a Light Blocking Curtain?

People utilize them for two major reasons:

To block light

They may block up to 99 percent of sunlight, resulting in a dark, cave-like environment 24 hours a day. This is great for daytime nappers and night shift workers who sleep when the sun is shining.

To save money on electricity

Using blackout curtains all year can save a customer up to 25% on their energy cost. In the summer, they prevent heat from entering a room, while in the winter, they retain the heat.

Noise pollution should be reduced

Blackout curtains may effectively prevent street noise because of the thick fabric and extra back lining that works as a noise insulator. When you are not bothered by external noises, you can sleep well. While it will not entirely eliminate external noise, but it will considerably lower it.

Materials that need for making DIY room darkening window treatments

  • Fabric

Plan about six yards, but the exact quantity will depend on the size of your windows. To account for the hems, add around 10 inches to your measurements. Contrary to popular belief, the cloth does not need to be black, and it may be whatever colour you choose.

  • Blackout Lining

The fabric lining is most likely the most essential component since it will keep light out of the room. The majority of the choices will be made of a thick, white cotton.

  • Ribbon with Grosgrain

The tabs are made from grosgrain ribbon, which is more durable and sturdy than satin. This is particularly important for blackout curtains, which are typically heavier.

  • Thread

To stitch the pieces together, use white thread.

  • Pins

To keep the material in place until you’re ready to sew the pieces together, use pins.

  • Scissors

Choose fabric-cutting scissors that are sharp and heavy-duty. For precision and longevity, make sure the blades are stainless steel.

  • Meter Stick

A measuring tape may not lie level and solid enough, and rulers aren’t long enough. A metre, often known as a yardstick, is a flat, lightweight measuring tool that aids inaccurate measures.

Step by step instruction for DIY room darkening window treatments 

  • Calculate how much cloth you’ll require. For the top and bottom hems, as well as to allow the curtains to hang without being stretched to the gills, add eight to ten inches to the width and length of the window, from the curtain rod to the bottom of the floor.
  • Place the material flat on the floor and measure how much you’ll need, keeping in mind the extra material for the hems.
  • Mark the fabric with the yardstick and draw straight lines to indicate where to cut. Then you may start cutting.
  • Carry on with the technique for the blackout lining. The only difference is that the hemlines do not require more fabric.
  • After you’ve trimmed all of your material, iron out any creases.
  • Fold your hemlines over and iron them to keep the clean fold.
  • Collect your materials and set them out flat on the floor, right side down. With the correct side facing up, insert the blackout lining into the cloth.
  • You should fold the hems over the blackout lining and pin all of the corners and edges in place.
  • To join the lining to the curtain, stitch all of the edges together.

How do you sew a blackout liner onto your curtains?

A liner may be readily attached without the use of any stitching. The liner will come with tiny clips that you can use to attach it to your curtains when you purchase it. The liner should then be trimmed to fit your fabric. Then, rather than stitching, use hemming tape. Choose the type that can be ironed to establish a connection.

What kind of cloth should you use?

Look for blackout fabric because it will be thicker. Choose the kind that says 3-pass. This indicates it’s made up of three layers and a small amount of foam. If you don’t mind noise getting into your bedroom, the “2-pass” setting will be sufficient.

Wrapping it up

Making blackout curtains, DIY-style, can save you money and allow you to personalize their size and appearance if you have some extra time over the weekend or want to make your own version. Follow the above guide will help you to give the solution to avoid the hassle.

Disclaimer: Please follow these instructions at your own risk. ZebraBlinds takes no liability for any issues or damaged caused through following DIY methods. Since all blinds and shades are different, we always recommend checking with your blind manufacturer or retailer first before making any modifications to your blinds. As well, if you are uncomfortable on your own, look for the help of a professional.

Tagged , , , ,

About ZebraBlinds Canada

Leave a Reply

Your email address will not be published. Required fields are marked *