How to measure Faux Wood Blinds

Inside Mount

Inside mount blinds are installed inside the window casing. Minimum depth requirements vary by product; please check the product page for information.Inside Mount Image

  1. Measure the exact inside width, to the closest 1/8th inch, of the window casing from the left inside edge to the right inside edge at the top, middle and bottom of the window. Record the narrowest measurement as this will be your ordering width.
  2. Measure the exact inside height, to the closest 1/8th inch, of the window casing from the top inside edge to the bottom inside edge at the left, middle and right side of the window. Record the longest measurement as this will be your ordering height.
  3. Do not make any deductions on width for clearance; the manufacturing facility will make any necessary deductions to ensure the blind fits.
  4. Measure the window diagonally from the top left corner to the bottom right corner, and the top right corner to the bottom left corner. If the measurements are different by more than a 1/4" (inch), we recommend an outside mount installation for optimal fit and aesthetics.

Outside Mount

Outside mount blinds are installed outside the window casing, covering an area larger than the window opening itself.Outside Mount

  1. Measure the exact width to be covered to the closest 1/8th inch. Make sure the measurement overlaps the window opening by at least 1 1/2" on each side (3" total overlap) to ensure light control and privacy. Typically measured from the left outer edge of the window molding to the right outer edge. Please contact us if you have questions.
  2. Measure the exact height to be covered to the closest 1/8th inch, including the desired overlap. Typically measured from the top outer edge of the molding to the bottom outer edge of the molding. If you plan to install the blinds above the molding, please ensure you add the necessary height to account for it.
  3. The factory makes no deductions on outside mount blinds.

Options

Bay and Corner Windows

  • Made as individual blinds to fit in bay or corner windows
  • Each blind is on an individual headrail and has its own control
  • Indicate each blind with bypass or butt. Bypass is the blind mounted into the corner. Butt is the blind butted up to the other blind. Must provide blind location (left and right blind)
  • Control locations can be on the right or left side of each blind; placing controls opposite the corner is recommended
  • Depending on the angle, some corner blinds cannot be raised to the same height
  • Manufacturer will take appropriate deductions for proper fit
  • No additional charge
  • Valances will be mitered in the corner for finished look
  • Cornices and Wood Verticals are not available on bay or corner Windows
  • Slat alignment cannot be guaranteed on side by side blinds

Note: If you do not want manufacturer to take deductions DO NOT order as Bay or Corner.Standard manufacturing lead time does not apply.

Measuring Information:

blinds on baywindows blinds on cornerwindows

Corner Window
Measure: Width of each window from corner to the point you would like to cover.

Three-sided Bay Window

Three-sided Bay Window

Measure:

A & C: Width of side windows from the corners to the point you would like the blind to cover.
B: Width of the center window from corner to corner.
Angle A-B: Angle between windows (A) and (B).
Angle B-C: Angle between windows (B) and (C).

Four-sided Bay Window

Four-sided Bay Window

Measure:

A & D: Width of side windows from the corners to the point you would like the blind to cover.
B & C: Width of each window from corner to corner.
Angle A-B: Angle between windows (A) and (B).
Angle B-C: Angle between windows (B) and (C).
Angle C-D: Angle between windows (C) and (D).

Five-sided Bay Window

Five-sided Bay Window

Measure:

A & E: Width of side windows from the corners to the point you would like the blind to cover.
B, C & D: Width of each window from corner to corner.
Angle A-B: Angle between windows (A) and (B).
Angle B-C: Angle between windows (B) and (C).
Angle C-D: Angle between windows (C) and (D).
Angle D-E: Angle between windows (D) and (E).

NOTE: Measure bay angle using protractor or angle finder, or use two business cards in bay corner as illustrated above and fax to customer service.

Valance Options

VALANCE TYPE BLIND TYPE Maximum Continuous Width* TILT TYPE STANDARD OPTIONAL RETURN LENGTH FULL RECESS DEPTH
INSIDE MOUNT** OUTSIDE MOUNT
2 1/2″ Classic Valance
21/2 Classic Valance
Valance Returns
1/2″ to 1″: glued
1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
Keystone not available
2″ Traditions® Bamboo and Barnwood 94 1/4″ 93 9/16″ Cord 2 7/8″ 3 1/4″
wand 3 9/16″ 3 7/8″
cordless 3 3/8″ 3 3/4″
2″Traditions Composite 106 5/8″ 105 3/8″ Cord 2 7/8″ 3 1/4″
wand 3 9/16″ 3 7/8″
cordless 3 3/8″ 3 3/4″
2 1/2″ Traditions Double Bevel Composite 106 5/8″ 105 3/8″ Cord 3 15/16″ 4 1/4″
2″ Lake Forest® Premium Faux Wood and
2″ Lake Forest Faux Wood
106 5/8″ 105 3/8″ Cord 2 7/8″ 3 1/4″
wand 3 9/16″ 3 7/8″
cordless 3 3/8″ 3 3/4″
2 1/2″ Lake Forest Premium Faux Wood and
2 1/2″ Lake Forest Faux Wood
106 5/8″ 105 3/8″ Cord 3 15/16″ 4 1/4″
cordless 3 3/4″ 4 1/8″
3″ Classic Valance
3 Classic Valance
Valance Returns
1/2″ to 1″: glued

1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
Keystone not available

1″ Traditions Wood 100 1/4″ 98 3/8″ wand 2 1/16″ 2 3/8″
1″ Traditions Elite Wood 100 1/4″ 98 3/8″ wand 1 3/4″ 2 1/16″
2″ Traditions and Elite Wood
(optional on Elite for all controls)
100 1/4″ 98 3/8″ Cord 2 7/8″ 3 1/4″
wand 3 9/16″ 3 7/8″
cordless 3 3/8″ 3 3/4″
2 3/8″ Traditions and Elite Wood
(Optional on Elite for all controls)
100 1/4″ 98 3/8″ Cord 3 3/4″ 4 1/16″
cordless 3 9/16″ 3 15/16″
2 1/2″ Traditions Wood Shutter Style 100 1/4″ 97 3/4″ Cord 3 15/16″ 4 1/4″
cordless 3 3/4″ 4 1/8″
Traditions Elite Wood Vertical Blinds 100 1/4″ 98 3/8″ N/A 5 1/2″ 5 13/16″
3 1/2″ Legacy Valance
3 1/2 Legacy Valance
Valance Returns
1/2″ to 1″: glued

1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
Keystone not available

1″ Traditions Wood 100 1/4″ 98 3/8″ wand $ 2 1/16″ 2 7/8″
1″ Traditions Elite Wood 100 1/4″ 98 3/8″ wand 1 3/4″ 2 1/8″
2″ Traditions and Elite Wood

(optional on Elite for all controls and
at no charge)

100 1/4″ 98 3/8″ Cord $ 2 7/8″ 3 5/16″
wand $ 3 9/16″ 4″
cordless 3 3/8″ 3 13/16″
2″ Traditions Elite Authentic American
Hardwoods*
100 1/4″ 98 3/8″ Cord 2 7/8″ 3 5/16″
wand 3 9/16″ 4″
cordless 3 3/8″ 3 13/16″
2″ Traditions Distressed* 100 1/4″ 98 3/8″ Cord 2 7/8″ 3 5/16″
wand 3 9/16″ 4″
cordless 3 3/8″ 3 13/16″
2 3/8″ Traditions and Elite Wood
(optional on Elite for all controls)
100 1/4″ 98 3/8″ Cord 3 3/4″ 4 1/16″
cordless 3 9/16″ 4″
2 1/2″ Traditions Shutter Style 100 1/4″ 98 3/8″ Cord 3 15/16″ 4 3/8″
cordless 3 3/4″ 4 3/16″
Traditions Elite Wood Vertical Blinds 100 1/4″ 98 3/8″ N/A 5 1/2″ 5 7/8″
4 1/2″ Symphony Valance
4 1/2 Symphony Valance
Valance Returns
1/2″ to 1″: glued
1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
1″ Traditions® Wood 100 1/4″ 98 3/8″ Wand $ 2 1/16″ 2 13/16″
1″ Traditions Elite Wood 100 1/4″ 98 3/8″ Wand 1 3/4″ 2 1/2″
2″ Traditions and Elite Wood
(No charge for Elite Wood)
100 1/4″ 98 3/8″ Cord $ 2 7/8″ 3 5/8″
wand $ 3 9/16″ 4 5/16″
cordless $ 3 3/8″ 4 1/8″
2 3/8″ Traditions and Elite Wood
(No charge for Elite Wood)
100 1/4″ 98 3/8″ Cord $ 3 3/4″ 4 1/2″
Cordless $ 3 9/16″ 4 5/16″
2 1/2″ Traditions Shutter Style 100 1/4″ 98 3/8″ Cord $ 3 15/16″ 4 11/16″
Cordless $ 3 3/4″ 4 1/2″
Traditions Elite Wood Vertical Blinds 100 1/4″ 98 3/8″ N/A $ 5 1/2″ 6 1/4″
3″ Majestic Valance
3 Majestic Valance
Valance Returns
1/2″ to 1″: glued
1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
Keystone not available
2″ Traditions Composite 106 5/8″ 105 3/8″ cord 2 7/8″ 3 3/8″
wand 3 9/16″ 4 1/16″
cordless 3 3/8″ 3 7/8″
2 1/2″ Traditions Double Bevel Composite 106 5/8″ 105 3/8″ cord 3 15/16″ 4 7/16″
2″ Lake Forest® Premium Faux Wood and
2″ Lake Forest Faux Wood
106 5/8″ 105 3/8″ cord 2 7/8″ 3 3/8″
wand 3 9/16″ 4 1/16″
cordless 3 3/8″ 3 7/8″
2 1/2″ Lake Forest Premium Faux Wood and
2 1/2″ Lake Forest Faux Wood
106 5/8″ 105 3/8″ cord 3 15/16″ 4 7/16″
Cordless 3 3/4″ 4 1/4″
3 1/8″ Beaded Valance
3 1/8 Beaded Valance
Valance Returns
1/2″ to 1″: glued
1 1/16″ to 4 5/8″: optional glued
4 11/16″ and greater: not glued
Keystone not available
1″ Traditions Wood 100 1/4″ 98 3/8″ wand 2 1/16″ 2 3/8″
1″ Traditions Elite Wood 100 1/4″ 98 3/8″ wand 1 3/4″ 2 1/16″
2″ Traditions and Elite Wood 100 1/4″ 98 3/8″ cord 2 7/8″ 3 1/4″
wand 3 9/16″ 3 7/8″
cordless 3 3/8″ 3 3/4″
2 3/8″ Traditions and Elite Wood 100 1/4″ 98 3/8″ cord 3 3/4″ 4 1/16″
cordless 3 9/16″ 3 15/16″
2 1/2″ Traditions Shutter Style 100 1/4″ 98 3/8″ cord 3 15/16″ 4 1/4″
Cordless 3 3/4″ 4 1/8″
Traditions Elite Wood Vertical Blinds 100 1/4″ 98 3/8″ N/A 5 1/2″ 5 13/16″
3″ or 5″ Flat Valance
3 or 5 Flat Valance
Keystone not available
1″ Wood Specialty Shape Blinds N/A N/A wand N/A 2 1/4″
2″ Wood Specialty Shape Blinds N/A N/A cord N/A 3 7/8″
wand N/A 3 7/8″
2 3/8″ Wood Specialty Shape Blinds N/A N/A cord N/A 3 7/8″

✓= No charge           $ = Surcharge
* Continuous valances wider than sizes shown above will have two or more sections spliced together. Maximum width for spliced valances is 300″. Keystones not available with Elite Authentic Hardwood, Distressed, Barnwood, Bamboo, Composite or Faux Wood Valances.
**Assumes no returns on inside mount.

HOW TO MEASURE FOR VALANCE RETURNS

Window depths vary considerably depending on the age and style of the window. Always measure the window depth, regardless of the type of window treatment the client is considering. Knowing the depth when the order is placed can help prevent costly errors.
Use the information in your Graber® Pricing and Information Guide for Wood, Composite & Faux Wood to calculate the needed return length.
To calculate the return length, use this formula:

  • [Standard Return Length] minus [Client Window Depth] = Special Return Length to order for Inside Mount Blind

Remember: The smallest return width is ½”. The length of a return and the width of a valance are measured on the inside (back side-A) of the valance, not the outside (face-B) of the valance (see diagram at right).

MEASURE

HOW TO MEASURE AND ORDER VALANCES

A valance is supplied with your order in one of the following styles, depending on how your blind will be mounted. For a more custom look, the valance and returns may be special ordered to your measurements.
NOTE: Valances with returns are measured and cut from the INSIDE of the miter to ensure the most accurate fit when installed over the headrail or window frame.
Blinds ordered as an OUTSIDE MOUNT will be supplied with returns sized to cover the end of the blind back to the mounting surface. If projection brackets are requested when the blind is ordered, longer returns will be sent automatically. Outside mount blinds are availablen without returns upon request.
Additional ordering information:

  • Please state at the time of order if the valance and return measurements are for the EXACT size required so that no additions or deductions are made.
  • Different return sizes on the same valance. Always provide LEFT return INSIDE measurement first when ordering.
  • Valance projection is different if the blind has a wand tilter or cord tilter. Please refer to the previous specifications chart for more information.
  • Bay and Corner blinds – must specify return length on inside mount at time of order.

msureordrvlnce

Categories: Measuring Blinds
Copyright © 2017 ZebraBlinds.ca. All Rights Reserved.