Adding Z-wave blinds and shades to Wink

Pairing the Z-wave Virtual Cord shades to your wink hub is quick and easy. Before you start please ensure your shade is installed and functioning and make sure your wink hub is also set up and ready to go. You will require a paperclip as well.

Please go through the following steps to pair the shades with the hub.

Part One:

  1. Open the Wink app on your phone, locate the hamburger menu (three horizontal blue lines) and tap it. In the menu locate your hub and tap it. 
  2. In the new page tap the blue colored "ADD A PRODUCT" button. Now locate the "Blinds" category and finally select "ZWave Blind".
  3. Tap on Next, until you reach step 4.
  4. On your blind or shade locate the button on the headrail. It has an LED light integrated with it.
  5. Press and hold the button on the shade, the light will start flashing green, then amber. When flashing amber the shade will jog at which point you should let go of the button.
  6. On your phone tap on "CONNECT NOW".
  7. Press and hold the button on the blind or shade. When it flashes green let go. When the blind or shade jogs, it has been added to Wink and now you should see a device ready for use in your Wink App.

Part two:

  1. Open the Wink app on your phone, locate the hamburger menu (three horizontal blue lines) and tap it. In the menu locate your hub and tap it. 
  2. In the new page tap the blue colored "ADD A PRODUCT" button. Now locate the "Blinds" category and finally select "ZWave Blind".
  3. Tap on Next, until you reach step 4. Tap "CONNECT NOW" on step 4.
  4. Locate the pinhole on the back of the remote, and using a paperclip, press and hold the pinhole button until the lights start flashing. The remote will pair with Wink and a Z-wave remote will be available.
  5. Locate the pinhole on the back of the remote again, and using a paperclip tap and release the pinhole button. The lights will start flashing.
  6. Now on the shade, press and hold the headrail button until it flashes green. The shade will jog.
  7. You can now use the remote to control the shade again.
Categories: Wink
Copyright © 2007 - 2019 ZebraBlinds.ca. All Rights Reserved.