Adding and Removing a Remote

We offer many types of motorization. If you're not sure if you have a Motorized Crown or Zebra Sheer Shade, check if your shade has a built-in rechargeable battery. This feature is unique to these shades.

Before you can operate your shade with your remote, you will need to add the remote to the shade. This is called pairing.

Locate the 'program' button on your motor, and on the back of your remote. These will look like small holes and you will need to press them with a pin or other small object.

To add a remote to your shade:

1) Hold the 'program' button on your motor for 1 second. You will see the motor jog (move up and down) once.

2) Press the 'up' button on your remote. The motor will jog once again.

Your remote and shade are now paired.

To remove a remote from your shade:

1) Hold the 'stop' button on your remote for 5 seconds. The motor will jog once.

2) Hold the 'program' button on the back of the remote for 1 second. The motor will jog once.

Your remote is now unpaired from your shade.

Categories: Zebra/Crown RF Motorization
Copyright © 2007 - 2019 ZebraBlinds.ca. All Rights Reserved.